Understand What It Small Service and Large Service

It's hard to imagine if the center in urgent circumstances, the car or vehicle that we were traveling "protest" in the middle of the road.

If you do not want to experience something like that, from now is worth more attention to the vehicle, for example by performing routine service on a regular basis in the workshop of trust.

In general, service to be divided into two, namely servicing large and small service. Usually cover only a small servicing the engine oil and filter change, and clean the air filter. Should follow the guidelines of the manual book of his, about every 5000-7500 miles traveled should be serviced light.

Minimal change engine oil, because if too long feared to come circulate carbon residue. The impact is lower quality oil. As with the great service.

Treatment usually includes the servicing of all oil substitute, from engine oil, transmission, until the axle. Also the bolts on the legs of the vehicle also becomes part of the check at the time of service. Great service should be performed every 10,000 kilometers. It is intended that the condition of the vehicle is always in top shape.

In each serving both small and great service is usually also carried out engine or tune up. There are several work items that were once a regular tune ups, such as check spark plugs and spark plug wires, set the ignition timing, check air filter, clean the intake manifold, and set the valve for cars that still use the manual valve.

For cars that already use a computer (ECU), if necessary when doing a tune up scanner tool used to facilitate instant diagnosis found the problem on the car.

That is, if the scanner appliance trouble with the ABS sensor is not necessarily convicted the ABS sensor to be replaced, but first examined the cause, it could be just a loose socket.

How to Repair Car's Air Conditioner Performance

Air Conditioner including a vital organ for a particular car type city car. Because Air Conditioner greatly affect the comfort of passengers and motorists have to travel as far out in the sun. Electronic devices such as car audio device or TV car was going to be more durable because it protected from excessive heat.

In order for Air Conditioner continue to run normally, most car owners do not have to understand the parts as well as maintenance of Air Conditioner. The most standard way is to maintain the performance of car air conditioner is the periodic servicing. Air Conditioner Service is generally done at least once a year. For cars that use higher frequencies such as taxis, a shorter period of service was attempted that is six months.

When servicing, car owners are advised to ensure that the stages of work done completely and correctly. Air Conditioner Maintenance includes cleaning the cooling coil or evaporator followed the addition of compressor oil. Compressor oil is not its size. If you want to know his pass must unload the compressor. If
dismantled it should replace the seal-seal it. So if there's no interference with the compressor, just to be safe enough that we just add the oil.

Do also check the filter and dryer functions for filtering and drying. As well as checking the expansion of the function to pengkabutan. Prior to charging the freon, compressor aspirated with a vacuum device to remove the air in it. "We serviced it should be cleaned first. When
the purge air compressor, if not divakum, content
freonnya will not maximal.

Especially for charging Freon, car owners are advised to check at least six months. In that time according to, Freon is much reduced levels may be due to a subtle leak or evaporation. After charging, a new checks performed by the cooling rate as well as working termomoter automatic sensors. This sensor serves to reduce the cooling if the temperature inside the car reached a certain cold.

Usually we stay alone setting. But when it did not work so have to change. But because the original sensors are quite expensive, usually the owner requested be handled first. Normally we wear bandrek ordinary thermostat was able to walk again.

Air Conditioner Sensor original price depends on the type of car. Workmanship for a higher degree of difficulty, the charge was more expensive.

Caring for the Car, Can Not Carelessly Ways

Developing age, followed her car functions. This four-wheeled steeds did not merely become a means of transportation. In fact, the car could get his second wife. Therefore, the owner of his favorite car care items such as caring for his beloved wife. But, of course there is always a problem determining the proper repair and safe for the favorite car.

The choice, Workshop is a one stop service could be the right solution. The service move for body repair, engine service and Autocare.

Multi Workshop also become one of the insurances partner workshop in all city. Facilities complete with paint using a spray booth or oven system. The process of painting using standard procedures and manufacturer's warranty up to one year .. Having a lot of customers and partners, giving priority to service and customer satisfaction become the motto..

How to Take Care Car Radiator

Car engine ignition system in working with the hot conditions. Combustion of gasoline in the combustion chamber generates heat that will produce mechanical energy to drive the piston and rotate cruck as (crank shaft) and then channeled to the wheels.

The more heat engine, the more efficiently it works. But the heat is limited by the heat resistance of the piston and head are usually made of aluminum or cast iron dai. Most machines today are designed to work optimally at normal working temperature of about 195-2200 F, ideal hot conditions that will generate maximum performance and fuel consumption are ideal.

When experiencing a overheated engine, the first thing that happens is the engine feels ngelitik or coughing, and began to lose power. This is caused by a combination of heat and pressure that exceeds the engine room of our fuel octane. The combination was able to cause severe damage to pistons, piston rings, and rod bearings. Additionally, excess heat and pressure can bend the head, especially those made of aluminum.

What the hell, the cause of overheating? Radiator could be because the content is less, leaks in the radiator and radiator hoses and water-jacket (in the engine cooling water channels) filled with dirt. Thermostat can also be triggered by conditions that do not mebuka maximum cap, water pump does not work optimally, the radiator cap which was ugly then an extra fan to death.

If this happens, check the thermostat. The working principle is to drain the water thermostat at an ideal temperature, 80-90 degrees Celsius. So this thing will open and drain the water to circulate from the engine coolant to the radiator so the engine temperature is optimally maintained.

How to check it out, boil the thermostat until the temperature reaches 80-90 degrees Celsius. When opened, the normal means. But when opening partially or even not open at all, please replace with new.

No harm in seeing conditions thermoswitch. Usually mounted on the radiator. This sensor will work at a temperature of 80-90 degrees Celsius and will turn on the extra fan to cool the radiator. If you see any problems, try to boil the water reaches a temperature of 80-90 degrees Celsius, Measure its resistance with a multimeter. The resulting figure should be zero which means it works well.

Next, check the extra fan. See if an extra fan to work properly. If necessary replace the fans with extra blades more weeks to get a better cooling effect. Check also if the radiator cap is still in good shape, because the pressure is reduced as a result of a bad radiator cap to suppress boiling point of water cooling.

Water pump works to download Circulate the water from the engine to the radiator, usually the blades on the water pump gradually eroded, until his work was not optimal. After that, check the radiator grille. Objects made of aluminum that serves as a coolant. Make sure that the radiator is not clogged, the radiator can be brought into service to be scraped or cleaned.

Water Jacket is a water channel in the machine that serves to drain the water that will cool the engine. Use a radiator flush to clean the crust that accumulates in the water jacket. (*)

Tips:

1. Combine the water with the radiator coolant. Could be 50/50 or 70/30 mix of maximum.
2. Note the sign lights overheating.
3. Stop the vehicle, parked until normal conditions return.
4. Do not force run the vehicle if the lights lit overheat.
5. Never remove the thermostat.

Wipers cause streaks on the car windshield

Question: If it rains, my wipers turn on and the sound continues, even a scratch, on the car windshield I wonder why?

answer
Splash of water that rains will obstruct vision of motorists, so make sure the wipers are in good health. Wiper helps remove rainwater and dew glass. If the wipers are showing signs of stalled or later, immediately check the electric system. Usually the damage caused by electrical currents that break up or the gears are broken relationship, or a broken fuse, and damage to the starter motor. If the wiper moving normally, but can not wipe the rain water properly, usually due to a hard rubber wiper. So will cause scratches on glass. Replace the new wiper rubber, so as not to interfere with vision when driving in rainy season.

Easy Ways to Boost Car Engine Performance

HUMAN basically has the nature is never satisfied. So often the owners of the car feel less comfortable with the performance standards of a car he had. For that there are various ways to boost engine performance.

The easiest is to port-polish your car engine. With the ported-polish, power from the engine can be increased without having to add devices such as turbochargers and superchargers racing or just replace the muffler though.

Ported-polish is the easiest way of improving the performance of the engine without the need for complicated What ported-polish? Porting is an attempt to reshape the hole cylinder head intake and exhaust so that the volume of air and fuel that go so getting bigger and more highways.

While polishing is an attempt to smooth bagianbagian already ported and some other parts of the machine so that the suction of air and fuel that go so more smoothly.

So basically Porting-Polish practice is intended to increase and facilitate the intake of fuel and air to power the engine can be fueled.

In addition the practice of ported-polish is also useful to reduce the usual scratches on the cylinder head. Because for many, the beret that is the one factor of the cylinder head so the manufacturer can not work optimally.

Usually the subject is the ported-polished cylinder heads and intake manifold. But that should be remembered, ported-polished to be done right. With this simple business car users can easily boost the performance of their cars.

Pull the engine will be lighter with a longer breath.

Suddenly A Car Strike? This Is Some Reason

Have comfortable while driving, the car suddenly breaking down or stalled the engine? Many factors cause the machine crashed, starting from the ignition system until the fuel system. There is a good car owner to understand several factors that often interfere with the performance of the engine. Workshop Technician classify five causes of death machines.

Cars that are still using carburizing system, a dirty carburetor can make a machine breaking down. Dirty carburetor makes the engine work so hot quickly overwhelmed. If excessive heat, the engine will die. The second factor is the coil damage due to overheating. The cause could be due to the heat coil is weak or the installation of resistors that are not true. Resistor serves to reduce the large electrical currents coming into the coil. If one pair of resistors coil will overheat and die. As a result, the electricity was off.

In applying injection engine, a dirty fuel filter can cause the engine to die. Dirt will reduce the volume of gas flow, so the machine was not working optimally. Machine so burdened as it requires extra effort to suck up extra petrol. As a result the same, so the engine overheated. Weak gasoline pump also causes effects such as dirty filters, namely the addition of the machine workload. Yunan recommends routine check every 50,000 miles to determine the condition of filters and pumps.

The last factor is the most common is interference with the electrical system. Injection systems for automobiles, generally crank sensor could be causing the engine to die. This sensor serves to provide a signal to the control unit to operate the ignition. If the signal is weak, then the ignition will be interrupted. Other components included in the electrical system is the spark plug wires. Sometimes physically, spark plug wires are still good but maybe a conductor in which there is a break. As a result the electric current supplied was reduced. Although the car still can walk, if given a bit like turning an AC load or higher engine speeds are not strong and died.

To anticipate these things, there is no other way but to do orderly conduct periodic tune ups. At least every 10,000 miles. Less than that is better, but do not actually too often. If too often, according to the detriment of Yunan for causing the rubber and bolts quickly wear out, especially in the carburetor.

Why Car Oil Fast Out?

Car oil is one important factor for the continuity of the engine. What should we do when oil suddenly run out quickly? At least there are several causes of why we fast car engine oil is depleted or reduced beyond normal circumstances.

First, there was a leak in the seals and packing on the sidelines of the machine. So that the leak was made ​​dropwise oil wasted during engine combustion process takes place. Another indication, if our car exhaust white smoke when the car is running. It could be because the oil that burned in the combustion process, caused by leakage at the piston ring.

The fix, if it's because of leaks in the seals and packing, will inevitably have to dismantle the machine, to check and replace a new seals and packing if indeed the source of oil leaks from there. Then, compression can also check the car, with the cylinder head to disassemble it. Check whether the condition of the piston ring is qualified or not to hold the oil does not burn chamber infiltrates.

The most common means there are two causes why the oil run out quickly, could be due to a leak or because the oil was also burned in the combustion process because the ring Seker was no longer able to hold oil.

How to choose a quality auto repair shop

High work activities demanding comfort. Moreover, if the activity is using the car daily. Four-wheel vehicles would be okay we've got, if any maintenance taken seriously by professional experts.

We must be smart in choosing a car repair shop that will become our subscription, select the auto repair shop of cheap but quality is bafus. If you want proof, just come straight to the garage the car by trying to care there. Treatment usually includes interior, exterior and engine.

Treatment includes cleaning the interior of total, dashboard, door trim up to the passenger seat. For exterior body can eliminate mold, crust, scratches body to restore the paint to look new. Process on the exterior, it is clear Doni include removal of mold in the glass.

If the engine can clean the crust in the engine, the remaining oil. Then there is the coating until the dressing. Old saloon cars in our workmanship 4-5 hours. We have warranty 1 x 24 hours. There are even services antarjemput up in a radius of 5 kilometers from the workshop.

Piston Ring Car May Not Fussy

Engine performance is one important concern of motorists. The most delicious, so stepped on the gas spur kitchen car responds very maximum. Motorists must not complain when the engine feels powerful. Not only because of engine trouble, but practically such a phenomenon also shows the wasteful fuel consumption. In general, one that causes this condition is the existence of leakage of engine compression. Normal compression will result in a maximum engine power.

Compression becomes abnormal when there is a leak. Leaks can cause compression of the engine decreases. So that the output of the engines is small. Among the several possibilities that can cause leaks is damage to the piston ring. Components are located inside the engine can be scratched (aus) or dirty. The relationship between the condition of piston rings and engine leaks are very strong, considering the piston rings plays an important role in maintaining the density between the piston and cylinder wall.

With this density, piston rings will prevent too much fuel and air mixture into the oil chamber. This must be prevented because when too much into the oil chamber, will cause the engine compression pressure decreases. Well, if the engine power to feel weak with symptoms as above, try to focus attention to the problem of compression. How, do a compression pressure test. There are special tools that can be used which can show pressure compression standard that allowed by each vehicle. When the compression pressure was below standard, the next step is to find the cause of the problem of compression.

The relationship between compression and damage the piston ring can be determined by adding oil into the cylinder during the compression tests. This test needs to be done considering the cause compression to leak not only damage to the piston ring. Can also be caused by worn valve seals and valves, cylinder head gasket (gasket) can not close the cylinder block and cylinder head. If, compression rises after oil is added, then only the two main causes, cylinder walls and piston rings.

If proven piston ring is broken, the only solution is to overhaul. Actually, the above problems can be avoided. Namely, by performing routine maintenance. Especially, related to engine oil and engine cooling system (radiator water). Oil should be checked and replaced regularly. Substitution of oil depends on the type used. Can every 5,000 kilometers, 10,000 kilometers and so on. Depending on the manufacturer's recommendations and the activities of automotive oil. Quantity and quality of oil must also be examined. Must be between the lines E and F. More save when in position F. Likewise, the radiator water. Quantity and quality must be maintained. Do not arise excessive corrosion that could hinder the process of cooling the engine.

Car Tips Detecting Damage Brake Booster

Stepping on the brake pedal should not need to spend big power. With a bit of pressure just enough to make the brake pedal depressed and the vehicle speed control. When the brake, the pedal feels light. The brake pedal feels light was created for comfort in driving. We would be very disturbed when the brake pedal hard.

Among us, there must be an experienced brake problems when driving. For example, although the car brake grip (gripping tightly), but it often feels hard pedal when stepped on. Occasionally soft, but more often harder. Though the master brake has been replaced. Brake was new and still thick. But, it turns out this problem remains unresolved.

Is that because the brake booster? Indeed, the case surrounding the brakes will inevitably involve a component called the brake booster. Maybe also on the machine. Including the problem of the brake pedal hard. Among these components, most likely the brake pedal hard problems triggered by damage to the brake booster. Therefore, the brake booster is constructed to make the brake pedal lightly.

To detect whether or not defective brake booster, do the following steps. Turn the ignition to the OFF position (engine off). Roll (tap-off) brake pedal repeatedly to get the highest position of the brake pedal (foot still pressing the brake pedal). Turn on the machine. By the time the engine is on, the brake pedal will go down by itself (the position of the foot still pressing the brake pedal).

Then turn off the engine. At the time the engine dies, then the brake pedal must remain at the lowest position, and the pedal will go up if we do the reshuffle. When the test results did not correspond with the steps above, it is likely the source of the problem is the brake booster. Well, if proven that the brake booster problems, to overcome them should bring your car to the garage.

Because, to handle a minimum of brake booster must be replaced. In fact, it may also need to overhaul. For these two things, of course, should not be done alone. Then, what if the results of detection according to the steps above and showed no damage in the brake booster? Maybe the damage actually occurred in the installation of one way valve, or in vacuum.

Do not underestimate the Car Care

The car engine has always been one of the main focus when we are going to buy a used car or even a new one. Because the engine is the brains of the car itself. If the car engine trouble, get ready just drained the contents of the bag. Ever down the engine? Yes, that's what happens when the engine is damaged and could not work properly.

In addition to costly replacement auto parts are very expensive, it runs can make us travel without using the vehicle's pet. Therefore, take care of personal automobile engine is just as important as dressing the outside appearance. Useless if from the outside look beautiful, but inside it only took a machine that already want damaged. Well, that all okay, see some car care guide below.

replace the Engine Oil Mobil Oil is a vital part of the machine. His role is to reduce internal friction inside the engine. Without a good oil, will be more susceptible to friction inside the engine and cause certain machines easily damaged or worn. Thus, the function of oil can make the machine more durable. Oil will continue to happen fast if the condensed combustion, so if you've been traveling a lot, will more often you change the oil and obey the advice of a mechanic, on how many kilometers we have to return for servicing and replacing engine oil. In this way, the machine will be more durable.

Note Altitude Engine Oil oil level should also be routinely checked for each machine is started, the heat produced may be just vaporize the oil, so that the height of the oil will be reduced.

Always Check the condition of the car radiator Radiator serves to keep the engine temperature is always stable. So that the radiator is the part that serves to keep the engine in order not to heat faster. Always a time to time to check the radiator, including a leak check, replacement of water, thus maintaining the performance of the radiator.

Step Right To Modify Used Cars

When smart to choose the used car can be polished to attract the eye. Who knew cars could be a compelling ride. So that no one steps, so it's good to follow some of these modifications in order to produce a mount that does not disappoint.

The first step in a plan to modify the car is using the services of a proven reputation modifier. With those more experienced like this, we can devote the initial design of the car as desired. Furthermore, these designers will certainly provide useful input about the color, tires, interior and anything else related.
Budget Having no idea what kind of car you want, then it's time to peek into the wallet. Make sure how much the funds allocated for this modification. Research in advance what the price of spare parts and time required for the modification. When choosing to use professional services, so make sure to enter an additional budget for honoraria. Do not set a budget that fits too. Exaggerating the budget is around 10 per cent in case of unwanted things.

Finding the right car After ensuring adequate budget, now looking for a decent used car receives polish. The less rust and damage to the wallet, the screaming delight. But most importantly, be sure to research first about the car. Most do not know the year of manufacture and specifications are followed. One thing that should not be overlooked, make sure the candidate you're not a car ride from the fruits of thieves.
Spare Part List After spending the spare part, it's worth stacking shopping list. Record anywhere save the stuff that did not buy the same item twice. Do not forget to also check if the spare part is already embedded in the favorite car.

Cat Changes There are several methods suggested several workshops leading to the erosion of the paint. The most commonly used is blasting media which makes the car back to the original gray color. Can also use soda blasting, using baking soda in a high pressure. The results of this soda blasting a car looks clean, shiny 'fresh from the factory'. The final method is the acid dye. Where the car will be immersed in a pool full of acid to diminish the paint.

New Cat Once the car is free of paint, it's time to contact an experienced painter. References can be sought through the garage and the famous store that has often provide services such painters. You can discuss with him a matter of preference and brand colors. Although looking a bit expensive, but guaranteed not to regret the outcome. Important, do not be lulled by cheap paint because it offers but the quality is not necessarily reliable.
While the engine was painted car, it's time to buy things that are important and the most expensive. Machine. Make sure the machine is selected in accordance with the desired power plant. Next, please find a machine with the best price according to its kind.

Brakes and Suspension Search engines can be coupled with finding a suitable suspension system. Remember better to spend a lot of money for two things at the moment, it is guaranteed durable. Compared to look for cheap materials but quickly broken. Match all kinds and types of tires with brake option.

Details After all is installed, little else can you enjoy the new car but the old. But got to remember details that are always captured people's attention, the interior and exterior. On the outside do not get too much play of color, because the likely result even disappointing and unsightly. Choose a color and sweep techniques are appropriate because therein lies the 'wow' factor. Similarly, the inside, not to impose values ​​that have been painstakingly beautiful exterior constructed.

Excellence I Drive Throttle Controller

I Drive Throttle Controller is the acceleration power control devices on cars. System to regulate the percentage of torque on gas. These devices can increase the pull of the car and save fuel consumption.

I drive a car with a system designed to drive by wire. So as to adopt the system plug and play without the need to cut or add to the cable. I drive has three modes.

Normal Mode is the mode that makes the normal gases such settings without a throttle controller.
Sporty Used with emphasis on the acceleration torque. So that will improve the performance of the pull of the car. The result, making the car more responsive.
Economy It is preferred because it can make a smooth acceleration. Most importantly, this mode can save fuel. Important I-Drive Throttle Controller? Yes, because its function is diverse.

Using plug and play system (unplug and plug).
Make the car more responsive
Save fuel
Can be used as a volt meter
Small and dynamic forms. So young h dashboard.
Easy to operate.
Plug itself can be dismantled for ten minutes without the need to call a mechanic.

Fuel Efficient Cars: Observe Temperature Working Machines

If we use a used car or old, try to look at our car engine working temperature. See the needle temperature instructions on the instrument panel. Try also a time to ask the authorized repair shop or join the mailing list or similar car clubs to ask at what point our engine temperature under normal conditions. If the temperature needle indicates a lower temperature for example, only a quarter (normally half), then there are the following possibilities:

1. Thermostat has been revoked: Making the engine work in cold conditions, usually because of overheating have occurred on the machine, so the thermostat removed. Solution: Install the thermostat according to the size of the factory recommended temperature.

2. Thermostat jammed: Occurs when the thermostat is damaged so it is always in condition to open. Solution: Replace the thermostat according to the size of the factory recommended temperature.

3. Low-temperature thermostat work: As a result of using a thermostat that low working temperature makes the machine work at a temperature low employment. Solution: Replace the thermostat according to the size of the factory recommended temperature.

Watch out, Floods Threaten Your Car

Car drivers to be careful crossing streets under water. If not, the car can be broken down on the road. Then, what should you do when a car hit by flooding? Here are some tips on handling the car after being hit by floods.

When the car hit by flood light:

• Check the condition of wheel bearings.
• Check the condition of the brake system.
• Check the ABS system works.
• Check the condition of tie rod and ball joint.

Floods are:

• Check the condition of the engine and transmission oil, when mixed with water, replace with new.
• Open the exhaust and air filter, if there is clean water and pat dry.
• Make sure the engine can spin the pulley by turning the key.
• Check the cylinder by opening the spark plugs, if there is clean water in a way start engine with spark plug condition is open all.
• Check for completeness of electrical machines, such as starter, alternator, and the ECU. If there is water, clean and dry.

Heavy flooding:

• Check the appropriate components in the category of mild and moderate flooding, and check the components that are in the cabin.
• Check all the ECU, combination meter, tape, relays, and fuse, and all the connectors inside the cabin. Pastika all free of water, then wash and dry it using a blower or hair dryer.
• Bring the car to the garage in order to get further examination.

Tips Overcome Difficult Engine Start

Questions such as the title above often arise when motorists attempt to tamper with the car have trouble starter. Machine did not react when the ignition is turned to the ON position. Once checked, the battery (batteries) is fine. Relations and the condition of battery terminals are also good. Starter motor was not problematic. When all these components normalnormal course, do not forget to check the wiring on the starter system. Could be, a tool that serves to conduct electricity is already fragile.

Fragile cables will have different resistance values. The next result, the flow of electricity to the starter motor is inhibited. Automatically, the starter motor does not react when the ignition is turned upside down many times. Very possible given the fragility of these wires in the engine room is often hot. Therefore, the case of fragile wires are common in vehicles five years old and above. Motorists usually overcome this problem by replacing the cables on the starter system.

Of course, this problem with the replacement of the engine starter can be difficult to overcome. If it is proven that the core problem lies in the wiring system of the starter, the engine will be easy to live when the ignition is turned to the ON position. Is this the only way? Not really. Actually, there is a more practical and inexpensive. Namely, by adding a starter relay on the circuit system. How, to prepare wiring and relays.

Remove the starter motor terminal 50 and connect to the relay terminal 85. After that, connect relay terminal 86 to the masses and connect relay terminal 30 with (+) battery. The next step which connects the terminal 87 the relay with the starter motor terminal 50. Technically, an additional relay is able to overcome the hard starter because the electric current that flows will be much greater. The electrical current from the battery straight out toward the magnetic clutch. Due to large currents, the magnetic field generated by the greater magnetic clutch. Large magnetic fields that allow the starter motor to react.

Tips Car Fix Stuck Electric Window

CAR is already equipped with power windows should routinely check the right door window glass. Press the power window. Most likely, the window still normalnormal only. One-touch glass up or down smoothly. But, try doing the same thing on the rear glass window left or right.

Do-do, one or both of the glass door windows can not go up and down smoothly as the front right window. Feels a bit stilted. Even bad at all. That's complaints about power windows presented the riders in general. Stuck on the glass rear window. Front right side window glass is relatively more smoothly because it is frequently operated. In general, congestion occurs because of rust on the components of the power window. Usually there's rust-rust in the metal-metal regulator.

Rust was also frequently found in the teeth of the driving motor power windows. Rust itself is formed due to water entering through the rubber-rubber (seal) the door. Therefore, to prevent cases like this, there are some simple things that we should do. Replace rubber glass list if the rubber has hardened and damaged. Seal does not close completely this is what makes water break and enter, making rust on metal. Often operate power windows.

Both the glass front doors and rear window. This operation can minimize the corrosion process. With these two things, the possibility of power window jams can be avoided. But, if the congestion is already happening, the solution is also easy. Namely, stay clean rust and lubricate (give fat / grease) metals earlier. Just, please note that in order to dismantle the power window motors and touch a little bit complicated. Need to open a lot of bolts installed in car doors. Be careful if you want to do it themselves. Some tips on handling power window jammed mention steps that seem easy.

Starting from prying door trim, glass player to open the lever, remove the power window switch to clean and lubricate the metal rusted. But, in our opinion, should leave the handling of power window jammed into the mechanics at the garage only. Because, when one opens, it is quite possible there are parts that actually broken. In addition, since the keys and bolts pretty much, the possibility of one pair could have happened.

Car's Air Conditioner Care Guide

Cleanliness of the toilets in the car, especially the cabin so that no dust or dirt is sucked into the evaporator air conditioner if left over time will clog and the AC is not cold. Besides the air produced is also unhealthy and can cause odor.

Do not smoke in the car because cigarette smoke can cause unpleasant odors and stubborn but also bad for health. Nicotine cigarettes can also contaminate the evaporator. Do not turn on the AC when the car heats, let the engine turn on the AC the new stable. Conversely, when shutting down the engine, turn off the AC first and turn off the ignition. That is, that AC is not heavy workload.

Park your car in the shade so that when driving a car when the back and turn on the AC, AC workload not too heavy. Should not turn on the AC when the car in a parking lot or waiting condition, in addition to gasoline wasteful, old air conditioner will not be long. Make checks / service routine (contents of Freon, drain the condenser, evaporator and other clean) to the workshop every six months or every 25-30 thousand miles.

When a problem is detected there are components that do the replacement right away so as not to cause further damage and cost more.

Tips for Accessories Cars Not Easily Broken

FUNCTION electronic items are very diverse, perhaps even still be growing. For example, the telephone application developed into application sending text and picture data. Coupled with integrated Internet network with electronic goods. Seeing the growth of electronic goods this time we must be very clever to care for and maintain electronic goods. In this section, there are a few suggestions for treating elektronikmu goods.

• Give the wrapping or container that is not exposed to dust. Also keep it away from direct impact. The container should also have holes so that the heat from electronic goods to come out.
• Use a cloth of delicate materials such as cloth for wiping goggles either screen or any other part.
• Use a special cleaning fluid / lens cleaner to clean the stain on the screen.
• Give sufficient time for electronic goods to eliminate the heat after use in a long time.
• Save electronics in places is quite cool but not damp with humidity can accelerate damage to electronic goods.
• Avoid contact directly into the sun and heat the rooms. Excessive heat can damage the existing components. Examples of the hot room is the room the car parked in the sun.
• If you do not understand how to repair electronic items, take it to the service can really be trusted, or product service center.
• Save your warranty card electronic goods. Generally, you get the chance of maintenance free service or product. This cost-effective way to still be wearing elektronikmu goods.
• Avoid moving the electronic medium or large in light conditions. Instead, enter into standby or hibernate mode (if any).
• Keep electronic items of food and beverages. Who knows when the food or beverage can contaminate and even damage the goods elektronikmu. With improved care of the performance of our electronic goods will also be optimized so that it will further facilitate our activities with diverse functions.